IRANTECH AP200 Wi-SUN Gateway

IRANTECH AP200 Wi-SUN Gateway

The IRANTECH AP200 is a device which can be used to run IoT networks based on Wi-SUN technology. IRANTECH AP200 can be used to setup a large scale Wi-SUN compliant network of maximum 10000 nodes. It also supports both mesh and star topology. Under ideal circumstances, this outdoor wireless device can cover about 1.5 km radius area using star topology cover about 6km radius area using mesh topology connected an outdoor fiberglass omnidirectional antenna. IRANTECH AP200’s strong housing can reach IP67 level of water proof and dust proof, so it can be installed outside anywhere with pole mounting. The IRANTECH AP200 supports flexible ways for communication with central server, including 3G/4G wireless cellular network, fiber cable or Ethernet


Description

Value

Physical Specifications
Dimensions (Height x Width x Depth)290mm x 274mm x 126 mm
Pole MountYes
Wall MountYes
Storage Temperature-40'C to 85'C
Operating Temperature-40'C to 70'C
Typical Power Consumption or Dissipation48 Watts
Protection gradeIP67
Wireless Communication Modules
IEEE 802.15.4g Wi-SUN compliantYes
4G LTE for GlobalYes
IEEE 802.11b/g/n Wi-FiYes
GPS for locationYes
Antenna Gain5dBi
Wi-SUN RF Parameters
ISM frequency band915.4-919
Spread spectrumFHSS (Frequency Hopping Spread Spectrum)
Transmit Power25 mW e.r.p.
Sensitivity-110 dBm@50kbps
-97 dBm@300kbps
Power Options
Power SupplyAC power supply: 85~336VAC
Battery Backup OptionsIntegrated modular battery unit for backup
Power ButtonYes
Support Protocols
IEC 60870-5-101/104, IEC 61850, IEC61968, DLMSYes
DHCPv6, DNS, VPN tunnelYes
IPv4, IPv6, UDP, TCP, CoAPYes
IETF 6LoWPAN, IETF RPLYes
IEEE 1901.1Yes
IEEE 802.15.4g/e, IEEE 802.11b/g/n, RS232Yes
System capacity
Network capacity (nodes access with repeaters)10000 units
Uninterrupted working time8 hours with battery
Product lifecycle time15 years
Computing capacityARM Cortex A7 dual core 1.2GHz/ 512K L2 cache with ECC protection/ DDR3L/4 1.6GHz with 1GBytes
PDF Catalogue
Online Catalogue